Manger's Paint and Varnish Remover 500ml

Manger’s Paint and Varnish Remover 500ml is a powerful surface preparation solution formulated to remove old paint, varnish, lacquer and resinous coatings from timber, metal and masonry. Its effective, fast-acting formula softens and breaks down hardened finishes, making it easier to strip coatings without excessive scraping or sanding.

Ideal for renovation, restoration and refurbishment projects, this remover helps restore surfaces to a clean, bare substrate ready for refinishing.

Key Features

• Product Name: Manger’s Paint and Varnish Remover

• Size: 500ml

• Fast-acting and effective formulation

• Removes paint, varnish, lacquer and resin build-ups

• Suitable for timber, metal and masonry substrates

• Helps reduce manual sanding and scraping

• Easy brush-on application

• Ideal for restoration and renovation projects

• Professional-grade strength

Powerful Coating Removal for Renovation Projects

Old paint and varnish coatings can become stubborn, discoloured and uneven over time. Manger’s Paint and Varnish Remover works by penetrating through layers of built-up finishes and softening them for quicker, cleaner removal. It is suitable for both interior and exterior surfaces, offering flexible use across many project types.

Recommended for:

• Wooden doors, frames and joinery

• Exterior cladding and trim

• Furniture and antiques

• Metal railings and fixtures

• Brickwork and stone

Efficient Application & Preparation

The controlled gel consistency ensures good adhesion to vertical and overhead surfaces, helping the product stay in place while it works. This reduces wastage and improves removal efficiency compared to liquid formulations.

Coverage & Application

• Coverage: Approx. 1–2m² per 500ml (surface and coating dependent)

• Application Thickness: Apply a generous but even layer for best results

Application Guidance:

1. Preparation: Work in a well-ventilated area and protect surrounding surfaces.

2. Apply: Brush a thick coat of remover onto the existing finish.

3. Dwell Time: Allow to penetrate per manufacturer’s guidance (typically 15–30 minutes).

4. Remove: Scrape softened coatings with a scraper or stiff brush.

5. Clean: Rinse or wipe the surface to remove residue.

6. Repeat if necessary: Stubborn layers may require a second treatment.

Why Choose Manger’s Paint and Varnish Remover 500ml?

For decorators, restorers and tradespeople tackling stubborn old finishes, this 500ml remover offers professional-strength performance in a convenient size. It accelerates the stripping process while reducing manual labour, delivering a clean, prepared surface ready for refinishing with paints, oils or varnishes.