Light Grey Sandstone Paving Project Pack

Light Grey Sandstone Paving Project Pack

Light Grey Sandstone Paving Project Pack

Pavestone Light Grey Sandstone Paving is supplied either in a 4 size Contractor Pack or as Single Size Packs and so can be laid in either a traditional garden setting, with a random pattern of paving sizes or using a single size(s) to achieve a contemporary style patio or pathway.


20.7m2 Contractor Pack (Crate)

900mm x 600mm (17 pieces)

600mm x 600mm (17 pieces)

600mm x 290mm (18 pieces)

290mm x 290mm (19 pieces)

71 paving slabs per pack

71 pieces (Crate) cover approximately 20.7m2 based on a typical jointing gap of 7-14mm.

Calibrated at 22mm for a consistent thickness.

Laying Comments

It is always advisable to view your chosen paving prior to purchasing at your local stockist to fully appreciate the diversity of colours in each range.

For best results and to reduce possible salt staining from the base mortar on the face, we recommend that a Slurry Primer should be applied to the underside of the paving at the time of laying. The addition of SBR Bond as an additive to the base mortar mix will improve the bond of the stone and the longevity of your patio.

A traditional sand cement pointing mortar or jointing compound can be used to point the paving.

Natural stone paving should be laid with the chamfered edge face down.

Each of the colour swatches reproduced in this brochure demonstrate the overall hue of a paved area. The natural colour variation of individual paving flags will vary significantly when viewed individually.